Table of Contents
Advertisement
COPIER MANAGEMENT
Copy default setting
Copy default setting
1 EXPOSURE MODE
2 EXPOSURE STEPS
3 TONER ECONOMY MODE
4 AUTO EXPOSURE
ADJUSTMENT
5 MANUAL EXPOSURE
ADJUSTMENT
6 QUALITY
7 OUTPUT FORM
8 PAPER SELECTION
9 JOB PROGRAMMING
0 DEFAULT DRAWER
! ZOOM MODE
@ SET COPY LIMIT WITH #-
KEYS
# CUSTOM SIZE FOR BORDER
ERASE
$ F&B P. MARGIN
% DRAWER FOR INSERT
SHEET
^ DRAWER FOR COVER
SHEET/STITCH
& ROTATE SORT
71
Content of copy default setting
This is the copy exposure selection mode. Auto (auto exposure mode) or manual
(manual exposure mode) can be selected.
7 or 13 exposure levels can be set for the manual exposure mode.
Select the initial toner economy mode which will be set when power is turned on.
The toner economy mode can also be turned off.
If the overall exposure in the auto exposure mode is too light/dark, use this to
adjust it.
If the overall exposure in the manual exposure mode is too light/dark, use this to
adjust it. It can be set separately for each mode; "TEXT", "PHOTO" and "MIXED".
Initial value for the copy quality mode can be selected.
Set the initial sort mode which will be set when power is turned on.
Select whether paper of the same size as the original is selected automatically
when it is set, or whether the size of the paper is selected manually.
"REGULAR" or "OFF THE PLATEN" can be selected for the program mode setting.
"REGULAR": Any of the program number "1" to "7" can be selected by touching the
program key.
"OFF THE PLATEN": The content of program "1" can be accessed automatically by
touching program key. Copying is possible as it is.
A frequently-used drawer can be selected automatically. When the Reset key is
pressed without setting an original, etc., the specified drawer can be selected.
* The stack bypass tray can not be set as a default drawer.
The size zoom mode (page 19) or the standard zoom mode (page 20) can be
selected for enlarge/reduced copying (zoom mode).
The pre-set limit on the number of copies that can be set for one copying operation
is 999, but the limit can be lowered.
Set the sizes of the originals for "CUSTOM SIZE" of border erase modes (page 28).
Borders outside the defined area will be erased.
Whether the Front & back page margin can be selected or not can be set on page
24.
The drawer of the insert sheets to be set can be selected in the insert mode (page
30).
The drawer of the cover stock to be set can be selected in the stitching mode
(page 45).
* This setting appears if an optional booklet stitcher is installed.
Set the normal sort copy or rotate sort copy by touching the sort key. The direction
of each paper can be changed in the rotate sort copy so that it makes easier to sort
the copies.
* This setting is not displayed when the copier is equipped with the optional finisher.
Page
72
72
72
73
73
73
73
73
73
74
74
74
74
74
75
75
75
Advertisement
Table of Contents
