Olivetti d-Copia 52 Operation Manual page 64

12. Set the setting of the finishing.
* When changing the sorter mode, touch the "SORT" key to select the mode.
* If an optional finisher is equipped, the settings of staple sort mode and punch mode
can be set in the same manner as with sorter mode setting.
* If an optional booklet stitcher has been installed, the staple sort mode setting can
be adjusted in the similar way to the sorter mode.
13. Set the number of copies by touch the key "+" or "-". This number can also be
entered with numeric keys.
14. Touch the "END" key. Copying will begin.
APPLICABLE COPY MODES
60