Table of Contents
Advertisement
5. Touch the "REGISTER" key.
The touch panel will return to the basic screen. The copying is possible with the
registered program.
2 Calling up a program
1. Press the Program key.
The program setting screen will appear.
* If "OFF THE PLATEN" is selected for the "9 JOB PROGRAMMING" on page 73,
function registered in "1" will be automatically called in the basic screen by pressing
the program key. Copying can be performed in the function registered in "1".
* When using the function of other than program number "1" while the "OFF THE
PLATEN" is selected for the "9 JOB PROGRAMMING" on page 73, touch the
"COPY" key for the program in the management mode setting screen. Go to next
step.
2. Touch the number ("1" to "7") of the program to be used. Registered copy functions
will appear on the screen.
* Program number key displayed in gray cannot be selected since it is not registered.
* The detailed setting will be displayed by touching each keys. Touch the "CHECK"
key to return to the previous screen.
3. Touch the "COPY" key.
The touch panel will return to the basic screen.
* After returning to the basic screen, set an original and press the Start key to start
copying with the registered function in the program number.
(21) Recall mode
If the copy mode is set, the "RECALL" key will be displayed on the basic screen.
After copy mode setting, setting details can be checked and modified by touching the
"RECALL" key.
FUNCTIONS
46
Advertisement
Table of Contents
