Copy Quality Selection; Interrupt Copying - Olivetti d-Copia 52 Operation Manual

FUNCTIONS
21
4. Set the zoom ratio of the length (X) by touching the upper "+" key or "-" key. After
highlighting, the zoom ratio can also be entered using the numeric keys.
* The zoom ratio returns to 100% by touching the "100%" key.
5. Set the zoom ratio of width (Y) by touching the lower "+" key or "-" key. After
highlighting, the zoom ratio can also be entered using the numeric keys.
* The zoom ratio returns to 100% by touching the "100%" key.
6. Touch the "END" key.
The touch panel will return to the basic screen, and the zoom ratios of the length and
width will be displayed.
* Touch the desired paper size key to change the paper size.

(2) Copy quality selection

Depending on the original, one of the following three types of copy quality can be
selected.
1 Text: For originals consisting primarily of text
2 Photo: For originals consisting primarily of photos and other half-tone images
3 Mixed: For originals with both text and photos
* The initial value of copy quality mode can be selected. (See page 73, "6 QUALITY")
1. Highlighted the "TEXT", "PHOTO", or "MIXED" key by touching one of them.

(3) Interrupt copying

If other originals are to be copied in the different setting during the copying operation,
interruption copy is useful. Interrupted copying operation can be resumed in the same
setting as before interrupted after finishing interrupting copy operation.
* This mode cannot be used if the transparency mode or presentation mode has been
selected.
1. Press the interrupt key. The interrupt indicator will blink. Wait a while until
"INTERRUPT MODE." is displayed and the interrupt indicator light.