Setting Change Function - Olivetti d-Copia 52 Operation Manual

FUNCTIONS
47
* After checking, touch the "CHECK" key, the touch panel will return to the basic screen.
* When the setting contents are changed, touch the "CHANGE" key after pressing any
one of the function keys. The function selection screen will appear. Reset the copy
mode in accordance with the procedure of each function.

(22) Setting change function

The "PAUSE" key will be displayed on the basic screen while copying is performed. If the
"PAUSE" key is touched, copying operation will be suspended to change the number of
copies.
* If an optional finisher has been installed, the staple sort mode and the punch mode can
also be adjusted. When using a booklet stitcher, the staple sort mode can be adjusted.
1. Touch the "PAUSE" key.
Copying operation is suspended and the setting change screen will appear on the
touch panel.
2. Change the number of copies by touching the "+" key or "-" key.
* If an optional finisher has been installed, the staple sort mode and the punch mode can
be adjusted. Touch each key and make the desired setting be highlighted. Also when
using a booklet stitcher, the staple sort mode can be adjusted.
3. Touch the "END" key.
Copying will be restarted.
* Copying operation is carried out in the setting changed from resuming point.