Olivetti d-Copia 52 Operation Manual page 39

FUNCTIONS
35
1. Set the transparencies in the stack bypass tray.
* Fan the transparencies before setting them.
* Up to 25 transparencies can be loaded into the tray at a time.
* Check if the paper of the same size as the transparencies has been set.
2. Set the original(s).
3. Touch the "FUNCTION" key.
The function selection screen will appear.
4. Touch the "HAND-OUT" key. If it is not displayed, touch " " or " " key to be
displayed.
The presentation mode setting screen will appear.
5. Touch the "COPIED" key to copy onto backing sheet, and touch the "BLANK" key not
to copy.
6. Specify the finishing of copy, by touching "DUPLEX", "SPLIT" or "1-SIDED" key.
* If "DUPLEX" or "SPLIT" is selected, go to next step.
If "1-SIDED" is selected, the basic screen will appear. Go to step 9.
7. Specify the type of original, by touching "DUPLEX", "BOOK" or "1-SIDED" key.
* If "DUPLEX" or "1-SIDED" is selected, go to step 9.
If "BOOK" is selected, go to next step.
* If "SPLIT" is selected in step 6, "1-SIDED" key will not appear.