Clearing The Add Job; Changing The Add Job Order - Olivetti d-Copia 52 Operation Manual

APPLICABLE COPY MODES
51

3 Clearing the add job

1. Press the add job key.
The reserved job will appear.
2. Select the job to be deleted.
3. Touch the "RECALL" key. The detailed setting is displayed.
Make sure that it is a job to be cleared.
4. Touch the "DELETE" key.
The display will return to the screen in step 2.
5. Touch the "DELETE" key.
* To cancel "DELETE", touch the "CANCEL" key.
6. Touch the "END" key.
The touch panel will return to the basic screen.

4 Changing the add job order

Although job will be copied in the order of reservation, the order can be changed after
the reservation.
1. Press the Add job key.
The reserved job will appear.
2. Select a desired job to be changed the order.
3. Change the order by touching the "
* Copying operation is carried out from job displayed upper side to lower.
UP" key or " DOWN" key.