Inverting Black And White [Invert Copy] - Olivetti d-Copia 52 Operation Manual

FUNCTIONS
43
4. Select the type of originals. "DUPLEX" or "1-SIDED" can be selected.
5. Select the binding orientation by touching the "LEFT" key or the "RIGHT" key.
The finishing setting screen will appear.
6. Set the number of copies by touching the "+" key or the "-" key.
7. To staple (booklet stitching), touch the "STAPLE SORT" key.
8. When settings of the number of copies and stapling (booklet stitching) are complete,
touch the "END" key.
9. Set the original(s).
* When setting the original on the platen, start with the first page.
10. Press the Start key.
* When using the DF, scanning of originals will be carried out one at a time and then
copying and stitching will be carried out.
* When using the platen, go to the next step.
11. When scanning of the original is complete, set the next original and touch the
"CONTINUE" key.
* Repeat this step until all originals have been scanned.
12. After all originals have been scanned, touch the "TO PRINT" key. Copying will begin.
After copying is completed, the touch panel will return to the basic screen.

(17) Inverting black and white [Invert copy]

Black and white of the image are inverted (reversed) for copying.
* If multiple inverted copies are performed, "PLEASE WAIT. NOW ADDING TONER."
may appear.