Changing The Setting Contents Of The Add Job - Olivetti d-Copia 52 Operation Manual

2 Changing the setting contents of the add job

The setting of finishing for the reserved job (number of copies and sorter mode) can be
changed.
1. Press the Add job key.
The reserved job will appear.
2. Select the job to be changed.
3. Touch the "MODIFY" key.
4. When changing the number of copies, touch the "+" key or "-" key for setting.
* Change the setting of finishing.
Press the "SORT" key to select the mode.
* If an optional finisher has been installed, the staple sort mode and the punch mode can
be adjusted. When using the booklet stitcher, the staple sort mode can be adjusted.
5. After all the settings has been completed, touch the "END" key. The touch panel will
return to the basic screen.
APPLICABLE COPY MODES
50