Table of Contents
Advertisement
WHEN PAPER MISFEEDS
93
3. If the misfed paper is in the re-feeding section, remove it.
4. Lift up the duplex cover.
5. If the misfed paper is under the cover, remove it.
Close the cover and go to step 8.
* If the misfed paper has not been removed in steps 1 to 5, it will be under the
reversing cover. Carry out next steps.
6. Unscrew the two reversing cover screws d located on the left side of the duplex
unit. The reversing cover e will open out downwards.
7. Remove the misfed paper without tearing it.
Close the reversing cover and fix it with the 2 reversing cover screws.
* If the paper does tear, remove any scraps of torn paper from inside the copier.
8. Push the duplex unit back in all the way.
5 Misfeed in DF
If "MISFEED IN FEEDER. REMOVE ORIGINAL(S)." appears, misfeed has
occurred in the DF.
1. Remove the originals from the original table. If the original set indicator go out,
copying can be resume. Reset the originals.
* When the original is difficult to remove, or if the original set indicator continues
to blink red even after the originals are removed, go to next step.
2. Remove the originals which have been ejected onto the original cover.
Advertisement
Table of Contents
