Olivetti d-Copia 52 Operation Manual page 106

2. Open the front cover.
3. Pull the duplex unit out toward you as far as it will go.
4. If the misfed paper is in the re-feeding section, remove it.
5. Lift up the duplex cover.
6. If the misfed paper is under the cover, remove it.
Close the cover and go to step 8.
* If the misfed paper has not been removed in steps 1 to 5, it will be under the
reversing cover. Carry out next steps.
7. Unscrew the two reversing cover screws d located on the left side of the duplex
unit. The reversing cover e will open out downwards.
8. Remove the misfed paper without tearing it.
Close the reversing cover and fix it with the 2 reversing cover screws.
* If the paper does tear, remove any scraps of torn paper from inside the copier.
9. Push the duplex unit back in all the way.
10. Close the front cover.
ABOUT 52 PPM COPIER
102