Opening Altienterprise Manager - Altigen AltiWare ACM 5.2 Administration Manual

Opening AltiEnterprise Manager

To open AltiEnterprise Manager, use one of the following methods:
For a single-system installation without a Domain Master, this first method is
•
recommended. From AltiWare Administrator, select VoIP > Enterprise Network
Management. AltiEnterprise Manager opens without a login dialog box.
For multisite VoIP domain management, from the Windows Start menu, select All
•
Programs > AltiWare ACC/ACM > AltiEnterprise Manager. A login screen
appears. (With this method you can log in to the Domain Master from any member
system or remote desktop.)
User name
DomainAdmin
(Logging in as
DomainAdmin gives you
rights to change the entire
AltiEnterprise Manager
configuration.)
Admin@domain master IP
address
(A Site Admin who logs into
the Domain Master in this way
has the same rights as
DomainAdmin.)
Admin@member server IP
address
(A Site Admin who logs in this
way can make changes on this
member server only.)
WARNING!
Chapter 25: Enterprise VoIP Network Management
Password
Default=22222. You can
change the password in
AltiEnterprise Manager:
Note: This password is not
the same as the AltiAdmin
password.
Enter AltiAdmin password
Enter the AltiAdmin
password for the member
server
If your AltiWare system is using dynamic IP addressing, you will see
the following warning message when launching AltiEnterprise
Manager. Please check the Internet Protocol (TCP/IP) Properties of
your server NIC interface and assign a fixed IP address to this server.
Login Domain Via Server
Enter the domain master's IP
address
Enter the domain master's IP
address
Enter the member server's IP
address
AltiWare ACM 5.2 Administration Manual 313