Table of Contents
Advertisement
Configuring the Multi-Tenant Table
Configuring the multi-tenant table involves first adding entries to the tenant
list, then using Extension Configuration and Trunk Configuration to assign
extensions and trunks, respectively, to tenant IDs.
To create tenant entries:
1.
In the Tenant window, click the Add button to open a small Tenant
Configuration dialog box.
2.
In the dialog box, type in the Tenant Name and click OK. Then click
the Apply button in the Tenant window. The tenant ID is assigned
automatically and sequentially.
3.
Repeat the above steps for all the tenants you want to add, then click
OK to close the System Configuration window.
To assign extensions to tenant IDs:
1.
Select Extension Configuration... on the Management menu to open
the Extension Configuration General window.
2.
For each extension you want to assign to a tenant ID:
a. In the Extension list, select and highlight the extension you want to
assign to a tenant ID. Each extension can be assigned to only one
tenant ID.
b. Select a tenant ID in the Tenant drop-down list under Personal
Information, then click Apply.
3.
Repeat the previous step for each extension you want to assign. When
you're done, click OK to close the Extension Configuration window.
To assign trunks to tenant IDs:
1.
Select Trunk Configuration... on the Management menu to open the
Trunk Configuration General window.
2.
For each trunk you want to assign to a tenant ID:
a. In the trunk list, select and highlight the trunk you want to assign to
a tenant ID.
b. Select a tenant ID in the Tenant Selection drop-down list, then
click Apply.
3.
Repeat the previous step for each trunk you want to assign. When
you're done, click OK to close the Trunk Configuration window.
10 AltiServ HPBX Supplement
Advertisement
Table of Contents
