Applying A Service Policy To A Specific Vlan Interface - Cisco 4700M Administration Manual

Configuring the XML Interface
Detailed Steps
Command
Step 1
config
Example:
host1/Admin# config
host1/Admin#(config)#
Step 2
service-policy input policy_name
Example:
host1/Admin(config)# service-policy input
MGMT_XML-HTTPS_POLICY
no service-policy input policy_name
Example:
host1/Admin(config)# no service-policy
input MGMT_XML-HTTPS_POLICY
Step 3
do copy running-config startup-config
Example:
host1/Admin(config)# do copy
running-config startup-config

Applying a Service Policy to a Specific VLAN Interface

This section describes how to apply an existing policy map to a specific VLN interface. A policy
activated on an interface overwrites any specified global policies for overlapping classification and
actions.
To apply the policy map globally to all VLAN in terfaces in the same context, see
Note
Policy Globally to All VLAN Interfaces in the Same Context"
Restrictions
The ACE allows only one policy of a specific feature type to be activated on an interface.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
8-14
Purpose
Enters global configuration mode.
Globally applies the management policy map to al l of theVLANs
associated with a context.
The keywords and arguments are as follows:
input—Specifies that the traffic policy is to be attached to
•
the input direction of an interface. The traffic policy
evaluates all traffic received by that interface.
policy_name—Name of a previously defined policy map,
•
configured with a previously created policy-map command.
The name can be a maximum of 40 alphanumeric characters.
(Optional) Removes the management policy map from all of the
VLANs associated with a context.
When you remove a policy, the ACE automatically resets the
associated service policy statistics to provide a new starting point
for the service policy statistics the next time that you attach a
traffic policy to a specific VLAN interface or globally to all
VLAN interfaces in the same context.
(Optional) Copies the running configuration to the startup
configuration.
section.
Chapter 8 Configuring the XML Interface
the"Applying a Service
OL-20823-01