Cisco 4700M Administration Manual page 243

Chapter 7 Configuring SNMP
Table 7-8
Table 7-8 Field Descriptions for the show snmp engineID Command Output
Field
Local SNMP engineID
Table 7-9
Table 7-9 Field Descriptions for the show snmp group Command Output
Field
Group name
Security model
Security level
Read view
Write view
Notify view
Storage-type
Row status
Table 7-10
Table 7-10 Field Descriptions for the show snmp host Command Output
Field
Host
Port
Version
Level
Type
SecName
Table 7-11
Table 7-11 Field Descriptions for the show snmp sessions Command Output
Field
Destination
OL-20823-01
describes the fields in the show snmp engineID command output.
Description
Identification number of the local SNMP engine on the ACE
describes the fields in the show snmp group command output.
Description
Name of the SNMP group or collection of users that have a common access policy
Security model used by the group, either v1, v2c, or v3
Security level used by the group
String that identifies the read view of the group
String that identifies the write view of the group
String that identifies the notify view of the group
Status of whether the settings have been set in volatile or temporary memory on the
device or in non volatile or persistent memory where settings will remain after the device
has been turned off and on again
Indicates whether the Row status for the SNMP group is active or inactive
describes the fields in the show snmp host command output.
Description
IP address of the target host
UDP port number to which notifications will be sent
Version of SNMP used to send the trap, either v1, v2c, or v3
Method for authentication and privacy
Type of notification configured
Security name for scanning the target host
describes the fields in the show snmp sessions command output.
Description
IP address of a target for which traps or informs have been sent
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Displaying or Clearing SNMP and Service Policy Statistics
7-57