Configuring Ssh Management Session Parameters; Configuring Maximum Number Of Ssh Sessions - Cisco 4700M Administration Manual

Enabling Remote Access to the ACE
Command
Step 3
do show telnet maxsessions
Example:
host1/Admin(config)# do show telnet
maxsessions
Maximum Sessions Allowed is 4
Step 4
do copy running-config startup-config
Example:
host1/Admin(config)# do copy
running-config startup-config

Configuring SSH Management Session Parameters

This section describes how to configure the SSH management session parameters. SSH remote access
sessions are established on the ACE per context. You can create a context, assign an interface and IP
address to it, an d then log into the ACE by using SSH to connect to thatIP address. This capability allows
you to specify a particular context when accessing the ACE. For details on creating users and contexts,
see the Cisco 4700 Series Application Control Engine Appliance Virtualization Configuration Guide.
This section contains the following topics:
•
•

Configuring Maximum Number of SSH Sessions

This section describes how to control the maximum number of SSH sessions allowed for each context.
Restrictions
The ACE supports a total maximum of 256 concurrent SSH sessions. The ACE supports a maximum 16
concurrent SSH management sessions for the Admin context and 4 concurrent SSH management
sessions for each user context.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
2-16
[context_name]
Configuring Maximum Number of SSH Sessions
Generating SSH Host Key Pairs
Chapter 2
Purpose
(Optional) Displays the maximum number of enabled Telnet
sessions. Only context administrators can view Telnet session
information associated with a particular context.
The optional context_name argument specifies the name of the
context for which you want to view the maximum number of
Telnet sessions. The context_name argument is case sensitive.
(Optional) Copies the running configuration to the startup
configuration.
Enabling Remote Access to the ACE
OL-20823-01