Displaying System Processes And Memory Resources Limits; Displaying General System Process Information - Cisco 4700M Administration Manual

Displaying System Processes and Memory Resources Limits

Hardware
cpu info:
memory info:
cf info:
last boot reason:
configuration register:
kernel uptime is 0 days 21 hours 25 minute(s) 17 second(s)
Displaying System Processes and Memory Resources Limits
This section describes how display system processes and memory resource limits and contains the
following topics:
•
•

Displaying General System Process Information

To display general information about all of the processes running on the ACE, perform the following
task:
Command
show processes [cpu | log [details | pid
process_id] | memory]
Cisco 4700 Series Application Control Engine Appliance Administration Guide
5-4
Motherboard:
number of cpu(s): 2
Daughtercard:
number of cpu(s): 16
total: 6226392 kB, free: 4315836 kB
shared: 0 kB, buffers: 17164 kB, cached 0 kB
filesystem: /dev/hdb2
total: 935560 kB, used: 611564 kB, available: 276472 kB
Unknown
0x1
Displaying General System Process Information
Displaying Detailed Process Status Information and Memory Resource Limits
Purpose
Displays general information about all of the processes running on the ACE.
This command is available only to users with an Admin role across all
contexts. The displayed system processes information is at the CPU system
level (the total CPU usage) and is not on a per-context level.
The show processes command with no options displays summary CPU
information for the Intel Pentium processor.
The keywords, arguments, and options are:
•
•
•
•
•
Chapter 5 Displaying ACE Hardware and Software System Information
cpu—Displays CPU information for the Intel Pentium processor
log—Displays information about process logs
details—Displays process log information for all process identifiers
pid process_id—Displays information about a specific process
identifier
memory—Displays memory information about the processes
OL-20823-01