Deleting Files - Cisco 4700M Administration Manual

Using the File System on the ACE
Detailed Steps
Command
Step 1
dir disk0:
Example:
host1/Admin# dir disk0:
Step 2
move disk0:[ source_directory/ ] filename
disk0:[ destination_directory/ ] filename
Example:
host1/Admin# move disk0:SAMPLEFILE
disk0:MYSTORAGE/SAMPLEFILE

Deleting Files

This section describes how to delete a file from a specific file system in the ACE. When you delete a file,
the ACE erases the file from the specified file system.
To remove a directory from the ACE file system, use the rmdir command (see the
Note
Directory"
Cisco 4700 Series Application Control Engine Appliance Administration Guide
4-16
section).
Purpose
(Optional) Displays the files available in the disk0: file system.
Moves a file between directories in the disk0: file system.
The keywords and arguments are as follows:
source_directory—(Optional) Name of the source directory
•
in the disk0: file system.
destination_directory—(Optional) Name of the destination
•
directory in the disk0: file system.
filename—Name of the file to move in the disk0: file system.
•
Chapter 4 Managing the ACE Software
"Deleting an Existing
OL-20823-01