Cisco 4700M Administration Manual page 199

Application control engine appliance
Hide thumbs Also See for 4700M:
Table of Contents

Advertisement

Chapter 7
Configuring SNMP
Table 7-2
SNMP MIB Support (continued)
MIB Support
CISCO-SLB-HEALTH-
MON-MIB
CISCO-SSL-PROXY-MIB
CISCO-SYSLOG-EXT-
MIB
CISCO-SYSLOG-MIB
IF-MIB
IP-MIB
SNMPv2-MIB
OL-20823-01
Capability MIB
CISCO-SLB-HEALTH-
MON-CAPABILITY
CISCO-SSL-PROXY-
CAPABILITY
CISCO-SYSLOG-EXT-
CAPABILITY
CISCO-SYSLOG-
CAPABILITY
CISCO-IF-CAPABILITY Reports generic information on interfaces (for example, VLANs).
CISCO-IP-CAPABILITY Defines managed objects for managing implementations of the IP
CISCO-SNMPv2-
CAPABILITY
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Description
Acts as an extension to the Cisco server load-balancing MIB
(CISCO-SLB-MIB). It provides tables for the health probe
configuration and statistics of the ACE.
The cshMonSfarmRealProbeStatsTable and cslbxProbeCfgTable
tables in the CISCO-SLB-HEALTH-MON-MIB provide details
about the probe data available in the show probe detail command
output.
Manages a Secure Socket Layer (SSL) Proxy device which
terminates and accelerates SSL and Transport Layer Security
(TLS) transactions. The proxy device can act as a SSL server or a
SSL client depending on the configuration and the application.
This MIB is used for monitoring the statistics of the proxy services
and the protocols including TCP, SSL, and TLS.
Extends the CISCO-SLB-MIB, provides additional server farm
configuration parameters (cslbxServerFarmTable), and configures
and monitors system log (syslog) management parameters for the
ACE. Use this MIB to set up syslog servers and set logging
severity levels.
Syslog is described by RFC 3164.
Describes and stores the system messages (syslog messages)
generated by the ACE. The CISCO-SYSLOG-MIB provides
access to the syslog messages through SNMP. The MIB also
contains a history of syslog messages and objects to enable or
disable the transmission of syslog notifications.
This MIB does not track messages that are generated from
Note
debug commands entered through the CLI.
Syslog is described by RFC 3164.
The IF-MIB is described in RFC 2863.
The Ethernet data port, Ethernet management port, and
Note
port-channel interfaces are available only in Admin
context. In this case, the IF-MIB supports all theinterfaces
for Admin contexts, while each individual user context
supports only VLAN and BVI interfaces.
and its associated Internet Control Message Protocol (ICMP), but
excludes their management of IP routes.
The IP-MIB is described in RFC 4293.
Provides the Management Information Base for SNMPv2. The
management protocol, SNMPv2, provides for the exchange of
messages that convey management information between the
agents and the management stations.
The SNMPv2-MIB is described in RFC 3418.
Information About SNMP
7-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

4700 series

Table of Contents