Chapter 1
Setting Up the ACE
Detailed Steps
Command
Step 1
config
Example:
host1/Admin# config
host1/Admin(config)#
Step 2
clock summer-time { daylight_timezone_name
start_week start_day start_month
start_time end_week end_day end_month
end_time daylight_offset | standard
timezone }
Example:
host1/Admin(config)# clock summer-time
Pacific 1 Sun Apr 02:00 5 Sun Oct 02:00 60
OL-20823-01
Purpose
Enters global configuration mode.
Configures the ACE to change the time automatically to summer
time (daylight saving time).
The keywords, arguments, and options are as follows:
daylight_timezone_name—The eight-character name of the
•
time zone (for example, PDT) to be displayed when summer
time is in effect. See
zone acronyms used for the daylight_timezone_name
argument.
start_week end_week—The week, ranging from 1 through 5.
•
start_day end_day—The day, ranging from Sunday through
•
Saturday.
start_month end_month—The month, ranging from January
•
through December.
start_time end_time—Time, in military format, specified in
•
hours and minutes.
daylight_offset—Number of minutes to add during the
•
summer time. Valid entries are 1 to 1440.
standard timezone—Displays a list of well known time
•
zones that include an applicable daylight time start and end
range along with a daylight offset. Available list choices are
as follows:
ADT—Atlantic Daylight Time: 2 a.m. 1st Sunday April
–
to 2 a.m. last Sunday Oct, + 60 min
AKDT—Alaska Standard Daylight Time: 2 a.m. 1st
–
Sunday April to 2 a.m. last Sunday Oct, + 60 min
CDT—Central Daylight Time: 2 a.m. 1st Sunday April
–
to 2 a.m. last Sunday Oct, + 60 min
EDT—Eastern Daylight Time: 2 a.m. 1st Sunday April
–
to 2 a.m. last Sunday Oct, + 60 min
MDT—Mountain Daylight Time: 2 a.m. 1st Sunday
–
April to 2 a.m. last Sunday Oct, + 60 min
PDT—Pacific Daylight Time: 2 a.m. 1st Sunday April
–
to 2 a.m. last Sunday Oct, + 60 min
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Setting Up the ACE
Table 1-1
for the list the common time
1-21