Cisco 4700M Administration Manual page 159

Chapter 6 Configuring Redundant ACEs
Command
no associate-context name
Example:
host1/Admin(config-ft-group)# no
associate-context C1
Step 4
peer peer_id
Example:
host1/Admin(config-ft-group)# peer 1
no peer peer_id
Example:
host1/Admin(config-ft-group)# no peer 1
Step 5
priority number
Example:
host1/Admin(config-ft-group)# priority 150
no priority
Example:
host1/Admin(config-ft-group)# no priority
Step 6
peer priority number
Example:
host1/Admin(config-ft-group)# peer
priority 150
no peer priority
Example:
host1/Admin(config-ft-group)# no priority
Step 7
preempt
Example:
host1/Admin(config-ft-group)# preempt
no preempt
Example:
host1/Admin(config-ft-group)# no preempt
Step 8
inservice
Example:
host1/Admin(config-ft-group)# inservice
OL-20823-01
Purpose
(Optional) Removes a context from an FT group.
Associates a peer ACE with an FT group.
For the peer_id argument, enter 1 as the identifier of an existing
peer appliance. You can only enter 1.
(Optional) Removes the peer association with the FT group.
Configures the priority of an FT group on the active member.
Configure a higher priority on the FT group member that you
want to be the active member.
The number argument specifies the priority of the FT group on
the local peer. Enter an integer from 1 to 255. The default is 100.
(Optional) Restores the default priority of 100.
Configures the priority of an FT group on the remote standby
member. Configure a lower priority on the FT group member that
you want to be the standby member.
The number argument specifies the priority of the FT group on
the standby member. Enter an integer from 1 to 255. The default
is 100.
(Optional) Restores the default priority of 100.
Configures preemption after it has been disabled. Preemption
ensures that the group member with the higher priority always
asserts itself and becomes the active member. By default,
preemption is enabled.
(Optional) Disables preemption.
Places an FT group in service.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Configuring Redundant ACEs
6-15