Displaying Installed Software Information - Cisco 4700M Administration Manual

Application control engine appliance
Hide thumbs Also See for 4700M:
Table of Contents

Advertisement

Chapter 5
Displaying ACE Hardware and Software System Information
Serial Number: QCN21220038
Hardware Rev: 1.1
VID: V01
CLEI: COUCADFCAA
MFG Part Num: 800-29070-01
MFG Revision: 01
Slot No. : 1
Type: ACE Appliance
Table 5-1

Displaying Installed Software Information

To display the installed software copyright or version information for the ACE, perform one of the
following tasks:
Command
show copyright
show version
Examples
The following example shows the output for the show copyright command:
host1/Admin# show copyright
Cisco Application Control Software (ACSW)
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2006, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
The following example shows the output for the show version command:
host1/Admin# show version
Cisco Application Control Software (ACSW)
TAC support: http://www.cisco.com/tac
Copyright (c) 1985-2009 by Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
loader:
system:
6_/auto/adbure_nightly2/nightly_rel_a3_1_0_throttle/REL_3_0_0_A3_0_0
system image file: (nd)/192.168.65.31/scimitar.bin
Device Manager version 1.1 (0) 20080805:0415
installed license: ACE-AP-VIRT-020 ACE-AP-C-1000-LIC
OL-20823-01
describes the fields in the show hardware command output.
Purpose
Displays the software copyright information for the ACE.
Displays the version of system software that is currently running on the ACE in
Flash memory.
You use the show version command to verify the software version on the ACE
before and after an upgrade.
Version 0.95
Version A3(1.0) [build 3.0(0)A3(0.0.148) adbuild_03:31:25-2008/08/0
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Displaying Installed Software Information
5-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

4700 series

Table of Contents