Clearing Heartbeat Statistics; Clearing Tracking-Related Statistics; Clearing All Redundancy Statistics; Clearing The Redundancy History - Cisco 4700M Administration Manual

Displaying or Clearing Redundancy Information

Clearing Heartbeat Statistics

To clear all heartbeat-related statistics, perform the following task:
Command
clear ft hb-stats

Clearing Tracking-Related Statistics

To clear tracking-related statistics for the Admin FT group only, a user context FT group only, or for all
FT groups that are configured in the ACE, perform the following task:
Command
clear ft track-stats [all]

Clearing All Redundancy Statistics

To clear all redundancy statistics, including all TL, heartbeat, and tracking counters, perform the
following task in the Admin context only:
Command
clear ft all

Clearing the Redundancy History

To clear the redundancy history, perform the following task in the Admin context only:
Cisco 4700 Series Application Control Engine Appliance Administration Guide
6-40
Purpose
Clears all heartbeat-related statistics.
When you enter this command for the first time, the ACE sets the heartbeat
statistics counters to zero and stores acopy of the latest statistics locally. From that
point on, when you enter the show ft hb-stats command, the ACE displays the
difference between the statistics that are stored locally and the current statistics.
Purpose
Clears tracking-related statistics for the Admin FT group only, a user context FT
group only, or for all FT groups that are configured in the ACE.
Use the optional all keyword in the Admin context only to clear tracking statistics
for all FT groups that are configured in the ACE. If you enter this command in the
Admin context without the all keyword, it clears the tracking statistics only for the
FT group associated with the Admin context. In a user context, you cannot enter
the all keyword, so you can clear the tracking statistics only for the FT group
associated with the user context.
Purpose
Clears all redundancy statistics, including all TL, heartbeat, and tracking
counters.
This command does not affect the redundancy history. To clear the redundancy
history, use the clear ft history command. For details, see the
Redundancy History" section.
Chapter 6 Configuring Redundant ACEs
"Clearing the
OL-20823-01