Adjusting For Daylight Saving Time - Cisco 4700M Administration Manual

Setting Up the ACE
Table 1-1
Acronym
MST
PT
PDT
PST
AKST
AKDT
HST
Australia
CST
EST
WST

Adjusting for Daylight Saving Time

This section describes how to configure the ACE to change the time automatically to summer time
(daylight saving time) by specifying when summer time begins and ends. All times are relative to the
local time zone; the start time is relative to standard time and the end time is relative to summer time. If
the starting month is after the ending month, the ACE assumes that you are located in the Southern
Hemisphere.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
1-20
Common Time Zone Acronyms (continued)
Time Zone Name and UTC Offset
Mountain Standard Time, as UTC – 7 hours
Pacific Time, either as PST or PDT, depending on the place and time of the year
Pacific Daylight Saving Time, as UTC – 7 hours
Pacific Standard Time, as UTC – 8 hours
Alaska Standard Time, as UTC – 9 hours
Alaska Standard Daylight Saving Time, as UTC – 8 hours
Hawaiian Standard Time, as UTC – 10 hours
Central Standard Time, as UTC + 9.5 hours
Eastern Standard/Summer Time, as UTC + 10 hours (+11 hours during summer time)
Western Standard Time, as UTC + 8 hours
Chapter 1 Setting Up the ACE
OL-20823-01