Cisco 4700M Administration Manual page 195

Chapter 7 Configuring SNMP
Table 7-2 SNMP MIB Support (continued)
MIB Support
CISCO-AAA-SERVER-
MIB
CISCO-APPLICATION
ACCELERATION-MIB
CISCO-ENHANCED-SLB-
MIB
OL-20823-01
Capability MIB
CISCO-AAA-
SERVER-
CAPABILITY
CISCO-APPLICATION-
ACCELERATION-
CAPABILITY-MIB
CISCO-ENHANCED-
SLB-CAPABILITY
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Description
Provides configuration information and statistics that reflect the
state of an AAA server operation within the device and AAA
communications with external servers. The
CISCO-AAA-SERVER-MIB provides the following information:
A table for configuring AAA servers.
•
Identities of external AAA servers.
•
Statistics for each AAA function.
•
Status of servers that provide AAA functions.
•
A server is defined as a logical entity that pro v ides any of the AAA
functions. The ACE can use a Remote Access Dial-In User
Service (RADIUS), Terminal Access Controller Access Control
System Plus (TACACS+), or Lightweight Directory Access
Protocol (v3) (LDAP) protocols for remote authentication and
designation of access rights.
Manages application acceleration system(s) in the ACE. This MIB
includes instrumentation for providing the performance statistics
and status of the condenser which is the core of the application
acceleration system. A condenser is a software accelerator that
applies several optimization techniques to accelerate Web
application access.
Supports the following server load-balancing functions:
A real server configuration with a real server that is identified
•
by a name.
The current state of the real server (for example,
•
OPERATIONAL, OUT-OF-SERVICE, PROBE-FAILED).
A real server configuration in a server farm.
•
A health probe configuration in a real server and server farm.
•
Health probe statistics for each real server.
•
A sticky configuration for an HTTP header, an HTTP cookie
•
and client IP address, and Secure Socket Layer (SSL).
The slbEntity Index used in the table is the slot number of the
ACE. Because the slot numbers value is not applicable for the
ACE appliance, the slbEntity Index will always have a value of 1.
The cesRServerProbeTable table in the
CISCO-ENHANCED-SLB-MIB provides details about the real
server probe statistics available in the show probe detail
command output.
The cesServerFarmRserverTable and cesRserverTable tables in
the CISCO-ENHANCED-SLB-MIB provide details about the data
available in the show rserver command output.
Information About SNMP
7-9