Displaying Other Ace Setup Configuration Information - Cisco 4700M Administration Manual

Application control engine appliance
Hide thumbs Also See for 4700M:
Table of Contents

Advertisement

Displaying or Clearing the ACE Setup Configuration and Statistics
Table 1-6
Field Descriptions for show ntp statistics memory Command
Field
Time since reset
Total peer memory
Free peer memory
Calls to findpeer
New peer allocations
Peer demobilizations
Hash table counts
Table 1-7
Table 1-7
Field Descriptions for show ntp statistics peer Command
Field
Remote Host
Local Interface
Time Last Received
Time Until Next Send
Reachability Change
Packets Sent
Packets Received
Bogus Origin
Duplicate
Bad Dispersion
Bad Reference Time
Candidate Order

Displaying Other ACE Setup Configuration Information

To display the ACE setup configuration information, use the following show commands from Exec
mode:
Cisco 4700 Series Application Control Engine Appliance Administration Guide
1-36
Description
Time in hours since the ACE was last rebooted.
Total peer memory available for the allocation of memory to peer structures.
Current available peer memory.
The number of calls to findpeer.
findpeer is an entry point to the allocation of memory to peer structures that looks for
Note
matching peer structures in the peer list.
Number of allocations from the free list.
Number of structures freed to the free list.
The count of peers in each hash table.
describes the fields in the show ntp statistics peer command output.
Description
IP address of the specified peer.
IP address of specified local interface.
Time that the last NTP response was received.
Length of time until the next send attempt.
The reachability status for the peer.
Number of packets sent to the NTP peer.
Number of packets received from the NTP peer.
Number of packets received from the NTP peer of a suspect origin.
Number of duplicate packets received from the NTP peer.
Number of packets with an invalid dispersion.
Dispersion measures the errors of the offset values, based on the round-trip delay and the
Note
precision of the system and the server.
Number of packets with an invalid reference time source.
Order in which the ACE may consider this server when it chooses the master.
Chapter 1
Setting Up the ACE
OL-20823-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

4700 series

Table of Contents