Deleting A Configuration Checkpoint - Cisco 4700M Administration Manual

Using the Configuration Checkpoint and Rollback Service
Detailed Steps
Command
checkpoint create name
Example:
host1/Admin# checkpoint create
MYCHECKPOINT
Generating configuration....
Created checkpoint 'MYCHECKPOINT'

Deleting a Configuration Checkpoint

This section describes how to delete a configuration checkpoint.
Prerequisites
Before you use this command, make sure that you want to delete the checkpoint. When you enter this
command, the ACE removes the checkpoint from Flash memory.
Detailed Steps
Command
Step 1
show checkpoint all
Step 2
checkpoint delete name
Example:
host1/Admin# checkpoint delete
MYCHECKPOINT
Cisco 4700 Series Application Control Engine Appliance Administration Guide
4-28
Purpose
Creates a configuration checkpoint.
The name argument specifies the unique identifier of the chec kpoint. Enter
a text string with no spaces and a maximum of 25 alphanumeric characters.
If the checkpoint already exists, the CLI responds with the following
prompt:
Checkpoint already exists
Do you want to overwrite it? (y/n)
configuration....
Created checkpoint 'MYCHECKPOINT'
The default is n. If you do not want to overwrite the existing checkpoint,
press Enter. To overwrite the existing checkpoint, enter y.
Purpose
(Optional) Displays a list of all existing checkpoints.
Deletes a configuration checkpoint.
The name argument specifies the unique identifier of the
checkpoint. Enter a text string with no spaces and a maximum of
25 alphanumeric characters.
Chapter 4 Managing the ACE Software
[n] y Generating
OL-20823-01