Completing Printer Setup; Test Print - Pitney Bowes Datamax w1110 Installation Instruction

Microsoft windows installation instruction network printer connection

12. Completing printer setup.

Select Finish to complete the wizard and begin using your

printer.

Your SendKit is now connected.

To test your printer is working correctly follow the steps

below.

On a PC

Go to your Control Panel

Select Devices & Printers

Double click on the Printer

(DataMax-O'Neil w1110)

1. Select Printer from the menu bar

2. Select Properties

3. Select General

4. Select Print Test Page.

Check that your label has printed correctly. If you have any

issues with the print refer to Troubleshooting later in this

document.

*AW32662reva*

AW32662 Rev. A 05/18

If you're still having trouble, then visit

support.pb.com/workstation

and select Errors & Troubleshooting.

3001 Summer St.

Stamford, CT 06926

www.pitneybowes.com

Table of Contents