Printer Menus
Using the
Setup Menu
A-16
To access the Setup Menu, the printer must be OFF
LINE. If the printer is ON LINE, press the On Line but-
ton once so the indicator above the button turns off.
Then, press and hold the Menu button for two seconds
to display the Setup Menu.
The Setup Menu options are:
1. Stop on Feed Err (Error)
2. Feeder Signal
3. Lines Per Address
4. Line Termination
5. Hex Dump Mode
6. Language
7. Transport Speed
8. Postal Bundle Break
9. Pre-Purge
10. Feed Gap
11. ROM Revision #
12. Print Head Size