Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 89

Configuring Phone Service and Voice Mail
Setting Up Each Station
STEP 6
STEP 7
STEP 8
SPA9000 Voice System Installation and Configuration Guide for Web UI
Voice Mail Server
c. Verify that the
such as 192. 1 68.40. 1 09:6060.
d. Click Submit All Changes. The phone reboots.
Close the browser window for this station.
Return to the browser window that shows the list of stations, and then repeat this
procedure for each station.
When you finish configuring stations, you can click the browser's Back
NOTE
button to return to the main web configuration page, or you can close the
browser.
To verify your progress, perform the following tasks:
•
Station Name: Verify that the station name appears on the phone display and in
the list of stations on the PBX Status page.
•
Mailbox Status: Click Voice tab > Line 2. In the
check the Mailbox Status
you configured with voice mail.
SPA9000 Voice tab > Line 2 page: Proxy and Registration section
•
Voice Mail: Press the Message button.
responses:
•
"Password" prompt: This prompt indicates that the station is configured
properly. You can enter the password and manage the mailbox.
•
"Mailbox number" prompt: This prompt indicates that no mailbox is
assigned to this station. Review the settings on the SPA400 Setup tab >
Voicemail User page (see
field displays the
Proxy and Registration
field. You should see a listing for each extension that
You hear one of the following
"Configuring the Voice Mail Server and Voice
SPA400_IPaddress
:6060,
section,
5
87