Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 82

Configuring Phone Service and Voice Mail
Configuring the SPA400
STEP 6
STEP 7
STEP 8
SPA9000 Voice System Installation and Configuration Guide for Web UI
Use the following illustration as a guide.
Click Save Settings at the bottom of the page.
To restart the SPA400, complete the following steps:
a. Click Administration tab > Reboot.
b. Click Restart System.
c. When the confirmation message appears, click OK. The SPA400 reboots.
Reboot OK. Go to Setup Page?
d. When the
for 60 seconds (the time required for the SPA9000 to re-register with SPA400).
To verify your progress, perform the following tasks:
a. Click the Status tab, and confirm that the SIP registration status is
SPA400 Setup tab > Voice page
message appears, click OK and wait
SPA400 Status tab
5
Registered
.
80