Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 88

Configuring Phone Service and Voice Mail
Setting Up Each Station
STEP 5
SPA9000 Voice System Installation and Configuration Guide for Web UI
b. Under General, enter a Station Name.
Telephone Configuration > Phone page: General section
This setting assists you in managing the phones.
NOTE
To configure voice mail service with the SPA400 voice mail server, complete the
following tasks:
a. Click the Ext 1 tab.
Call Feature Settings
b. Under
<lineN><mailbox>
Example: 2105
•
lineN: The SPA9000 line (1, 2, 3, or 4) that is configured with the voice mail
settings
In the example, 2 is the first digit in the Mailbox ID because you previously
configured Line_2 with the settings for the SPA400 voice mail server. By
comparison, if you had configured Line 3 for the SPA400 voice mail server,
you would enter_3 as the first number in the Mailbox ID.
•
mailbox: The voice mailbox number for this station, as configured on the
SPA400 Voice Mail Users page (see
Voice Mail Users," on page
in the Mailbox ID because this station retrieves voice mail from mailbox 105.
Enter the appropriate mailbox number for the station that you are
configuring.
Telephone Configuration > Ext 1 page: Call Feature Settings section
Mailbox ID
, enter the
"Configuring the Voice Mail Server and
82.) In the example, 105 is the final set of digits
in the following format:
5
86