Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 79

Configuring Phone Service and Voice Mail
Configuring the SPA400
STEP 3
STEP 4
SPA9000 Voice System Installation and Configuration Guide for Web UI
The user name must be entered exactly as shown: Admin. For information
NOTE
about managing system access, refer to the Cisco
Administration Guide
Click Setup tab > Basic Setup.
Enter the following settings:
Network Setup section:
•
Fixed IP address: Click the radio button, and then enter a valid IP address.
To avoid addressing conflicts, enter an IP address that is outside the
NOTE
range of addresses that are automatically assigned by your DHCP
server.
•
IP Subnet Mask: Enter the subnet mask for the subnetwork that the SPA400 is
on.
•
Gateway IP Address: Enter the IP address of the router for this subnetwork.
Domain Name Server (DNS) Address section:
•
Primary DNS: Enter the IP address of the primary DNS server.
•
Secondary DNS: Enter the IP address of the secondary DNS server.
NTP section:
•
NTP: Enter a fully qualified name of a Network Time Protocol server, such as
time.nist.gov.
•
Time Zone: Select the time zone for your region.
.
5
SPA9000 Voice System
77