Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 109

Configuring Special Features
Configuring the SPA932 Sidecar to Work with the SPA9000
SPA9000 Voice System Installation and Configuration Guide for Web UI
Example 1: Busy Lamp Field and Speed Dial:
fnc=blf+sd;sub=Accounting@$PROXYext=102@$PROXY
Example 2: Busy Lamp Field and Call Pickup:
fnc=blf+cp;sub=Accounting@$PROXY;ext=102@$PROXY
•
fnc (required): The function of this key. The following functions can be used
independently or in combination.
•
blf: Busy Lamp Field
Indicates the state of the monitored line.
•
Green: Idle
•
Red: Busy
•
Red Fast Blink: Ringing
•
Amber: Failed Subscribe (received 4xx response)
•
Amber Slow Blink: Undefined (may be no response to subscribe, or BLF not
specified)
Busy Lamp Field works only with SPA9x2 series phones, when CTI is
NOTE
enabled. SPA9x1 series phones do not support CTI.
•
sd: Speed Dial
Allows the user to dial the selected extension quickly, either to place an internal
call or to perform a blind transfer of an active call.
•
cp: Call Pickup (in combination with BLF)
Allows the user to pick up an unanswered call on the selected extension; can
be used only in combination with blf (cp+blf)
For a multi-function key, enter a plus sign (+) between the functions.
NOTE
•
nme (optional): Display name for SPA932 key. It may be overwritten with
successful SUBSCRIBE.
6
107