Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 54

Connecting the Equipment
Installing the SPA9000
STEP 6
STEP 7
STEP 8
SPA9000 Voice System Installation and Configuration Guide for Web UI
Optional Settings
In the
SPA9000 Router tab > Wan Setup page: Optional Settings section
It is recommended to set an IP address that is outside the address range
NOTE
assigned by the DHCP server. For example, if the DHCP server assigns IP
addresses in the range from 192. 1 68. 1 .50 to 192. 1 68. 1 .254, you should select
a static IP address between 192. 1 68. 1 .2 and 192. 1 68. 1 .49.
Click Submit All Changes. The SPA9000 reboots.
To verify your progress, click Router tab > Status. In the
WAN Connection Type
confirm the
Primary DNS
and .
SPA9000 Router tab > Status page: System Status section
area, enter the Primary DNS for your network.
Current IP
,
System Status
Current Netmask Current Gateway
, ,
4
section,
,
52