Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 102

Configuring Phone Service and Voice Mail
Configuring Inbound Call Routing
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
SPA9000 Voice System Installation and Configuration Guide for Web UI
Start Internet Explorer, and enter the IP address of the SPA9000.
Click Admin Login, and then click Advanced.
Click Voice tab > Line 1.
Contact List
Configure the
If you entered call forwarding in your rule, modify the
parameter, as needed, to specify the number of seconds that elapse before a call
is considered to be unanswered.
Repeat this procedure for all active lines.
Click Submit All Changes. The SPA9000 and the phones reboot.
To verify your progress, make an inbound call to the DID number and verify that the
call is directed to the specified target extension.
You have completed the basic installation and configuration. If you are interested in
configuring additional advanced features, continue to
Special Features."
parameter as described earlier in this section.
Cfwd No Ans Delay
Chapter 6, "Configuring
5
100