Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 69

Configuring Phone Service and Voice Mail
Configuring the SPA9000
STEP 4
SPA9000 Voice System Installation and Configuration Guide for Web UI
•
PBX Phone Parameters
In the
supports special features such as Busy Lamp Field.
SPA9000 Voice tab > SIP page: PBX Phone Parameters section
•
Auto Attendant Parameters
In the
This setting is required only if the ITSP uses inband signalling. This setting
allows the AA to decode the inband signalling and to recognize the caller's key
presses.
SPA9000 Voice tab > SIP page: Auto Attendant Parameters section
Click the Submit All Changes button. The SPA9000 device reboots.
CTI Enable
section, set
AA Decode Inband DTMF
section, set
5
to Yes. This setting
to Yes.
67