Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 52

Connecting the Equipment
Installing the SPA9000
STEP 3
STEP 4
SPA9000 Voice System Installation and Configuration Guide for Web UI
A progress message appears while the upgrade is in progress. The success
window appears when the upgrade is completed. The device reboots.
Click OK to close the confirmation message.
To verify the upgrade, start Internet Explorer, and enter the IP address of the
SPA9000. Check the
show the firmware version that you installed.
Router >S tatus
page. The
SPA9000 Router tab > Status page
Software Version
field should
4
50