Configuring Special Features
Configuring the SPA932 Sidecar to Work with the SPA9000
STEP 2
STEP 3
SPA9000 Voice System Installation and Configuration Guide for Web UI
f.
Route the auxiliary cable through the cable relief channel.
g. Locate the AUX port on the back of the SPA962. Connect the other end of the
auxiliary cable to this port.
h. Attach the supplied desktop stand to each unit.
i.
To connect another SPA932 unit to the first SPA932, use the supplied
attachment arms and screws. Connect the auxiliary cable from the AUX OUT
port of the first unit, to the AUX IN port of the second unit.
Connect a cable from the WAN port of the SPA962 to a port on your switch. The
display flickers briefly and then the color display appears with the assigned
extension number.
Use the administration computer to install the latest firmware for the SPA962.
6
105