Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 75

Configuring Phone Service and Voice Mail
Configuring the SPA9000
STEP 5
STEP 6
SPA9000 Voice System Installation and Configuration Guide for Web UI
If you are not configuring SPA400 voice mail, go to
mail service, enter the following settings:
•
Mailbox Deposit URL: 900@<IP address of SPA400>:5090
The SPA9000 uses this address to deposit voice mail on the voice mail server.
•
Mailbox Manage URL: 800@<IP address of SPA400>:5090
The SPA9000 uses this address to access voice mail on the voice mail server.
•
Mailbox Subscribe URL: 8888@<IP address of SPA400>:5090
The SPA9000 uses this address to subscribe to voice mail service on the voice
mail server.
•
Mailbox Subscribe Expires: 30
This setting ensures that the SPA9000 and the SPA400 voice mail server are
resynchronized every 30 seconds, and prevents problems when you make
changes in the settings.
Use the following illustration as a guide.
SPA9000 Voice tab > SIP page: Proxy and Registration section
****Click Submit All Changes. The SPA9000 device reboots. The SPA9000 is now
configured to register the SPA400.
You will perform the verification steps after you configure the SPA400.
NOTE
Step 6. To set up SPA400 voice
5
73