Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 74

Configuring Phone Service and Voice Mail
Configuring the SPA9000
STEP 4
SPA9000 Voice System Installation and Configuration Guide for Web UI
Also in the Proxy and Registration section, enter the following settings to ensure
that calls can be transferred and forwarded to the voice mail server:
•
VMSP Bridge
Set
service).
•
XFER Bridge Mode
Set
•
CFWD Bridge Mode
Set
SPA9000 Voice tab > SIP page: Proxy and Registration section
•
SIP Port: You can keep the default value of 5061 for Line 2. Each line must have
a unique SIP port.
•
Contact List: Leave the default value, aa, for the Auto Attendant. Later, you can
make changes. Using this basic setting at this point simplifies your testing and
verification of the configuration.
SPA9000 Voice tab > Line 2 page
to all (required if this line is being used for SPA400 voice mail
to all.
to all.
5
72