Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 158

Troubleshooting
SPA9000 Voice System Installation and Configuration Guide for Web UI
You can use IVR option #110 to verify the IP address on the SPA9000.
NOTE
3. Click PBX Status to view the status of the devices.
Q. How do I save my current configuration?
Follow the appropriate procedure, below, for the device that you want to back up:
•
SPA9000:
a. Start Internet Explorer, and then enter the IP address of the SPA9000. Click
Admin Login and then click Advanced.
b. From the menu, choose File > Save As.
c. Save the configuration as Web Page Complete. You can use the saved file to
review the saved settings in all pages of the administrative GUI.
•
SPA900 Series Phones:
a. Start Internet Explorer, and then enter the IP address of the phone.
b. From the menu, choose File > Save As.
c. Save the configuration as Web Page Complete. You can use the saved file to
review the saved settings in all pages of the telephone configuration.
•
SPA400:
a. Start Internet Explorer, and then enter the IP address of the SPA400. Log on.
b. Navigate to the page that has the settings that you want to save.
c. From the menu, choose File > Save As.
d. Save the configuration as Web Page Complete.
e. Only the currently displayed page is saved. You can use this file to review the
settings, as needed.
f. Repeat this procedure, as needed, for each page.
Q. How do I debug my SPA? Is there a syslog?
A. SPA sends out debug information via syslog to a syslog server. The ports can
be configured (by default the port is 514). Make sure you do not have firewall
running on your computer that could block port 514. For more information, see the
SPA9000 Voice System Administration Guide
.
B
156