Terminal Procedure Charts (Optional); Chart Selection - Garmin G1000 Cockpit Reference Manual

11.2 TERMINAL PROCEDURE CHARTS
(OPTIONAL)
The ChartView database is revised every 14 days.
Charts are still viewable during a period that extends from
the cycle expiration date to the disables date. ChartView
is disabled 70 days after the expiration date and is no
longer available for viewing.
FliteCharts data is revised every 28 days. Charts are
still viewable during a period that extends from the cycle
expiration date to the disables date. FliteCharts is dis-
abled 180 days after the expiration date and are no longer
available for viewing.
While on the Navigation Map Page, Flight Plan Page, or
Nearest Airports Page, selecting the SHW CHRT Softkey
displays the available terminal chart.
softkeys are shown in Figure 11-5.
Selecting the GO BACK Softkey reverts to the top
level softkeys and previous page.
*
These softkeys are only available with the ChartView option.
190-00708-00 Rev. A
The available
CHRT OPT CHRT INFO
* *
ALL HEADER PLAN
Figure 11-5 ChartView Softkeys
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
When no terminal procedure chart is available, the
banner CHART NOT AVAILABLE appears on the screen.
The CHART NOT AVAILABLE banner does not refer to
the Jeppesen subscription, but rather the availability of
a particular airport chart selection or procedure for a
selected airport.
If there is a problem in rendering the data (such as a
data error or a failure of an individual chart), the banner
UNABLE TO DISPLAY CHART is then displayed.

Chart Selection

1) While viewing the Navigation Map Page, Flight Plan
Page, or Nearest Airports Page, select the SHW
CHRT Softkey. The airport diagram or approach
chart is displayed on the Airport Information
Page.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to select the Airport
Identifier Box if another diagram is desired. If
desired chart is already displayed, go to step 6.
DP STAR APR WX
Selecting the GO BACK Softkey returns
to the top-level softkeys and previous page.
* *
FIT WDTH FULL SCN
PROFILE MINIMUMS
Selecting the BACK Softkey returns
to the Chart Selection Softkeys.
SECTION 11 – ADDITIONAL
FEATURES
SHW CHRT
*
NOTAM GO BACK
BACK
11-3