Table of Contents
Advertisement
Removing a graphics card
To remove a graphics card, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. If the blade workstation is installed in a BladeCenter unit, remove it (see
3. Remove the blade workstation cover (see "Removing the blade workstation
4. Lift the release latch that secures the graphics card to the system board.
5. Slide the card away from the graphics-card connector; then, lift the card out of
6. If you are instructed to return the expansion card, follow all packaging
28
BladeCenter HC10 Type 7996: Problem Determination and Service Guide
Graphics
card
Release
latch
on page 13.
"Removing the blade workstation from a BladeCenter unit" on page 16).
cover" on page 19 for instructions).
the blade workstation.
instructions, and use any packaging materials for shipping that are supplied to
you.
Advertisement
Table of Contents
