Table of Contents
Advertisement
Chapter 1. Introduction
This Problem Determination and Service Guide contains information to help you
solve problems that might occur in your IBM
workstation. It describes the diagnostic tools that come with the blade workstation,
error codes and suggested actions, and instructions for replacing failing
components.
Replaceable components are of three types:
v Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your
v Tier 2 customer replaceable unit: You may install a Tier 2 CRU yourself or
v Field replaceable unit (FRU): FRUs must be installed only by trained service
For information about the terms of the warranty and getting service and assistance,
see the Warranty and Support Information document.
Related documentation
In addition to this document, the following documentation also comes with the blade
workstation:
v Installation and User's Guide
v Safety Information
v Warranty and Support Information
Depending on the workstation model, additional documentation might be included
on the IBM Documentation CD.
The blade workstation might have features that are not described in the
documentation that comes with the workstation. The documentation might be
updated occasionally to include information about those features, or technical
updates might be available to provide additional information that is not included in
the blade workstation documentation. The most recent versions of all BladeCenter
documentation are at http://www.ibm.com/systems/support/. In addition to the
documentation in this library, be sure to review the IBM BladeCenter Planning and
Installation Guide for your BladeCenter unit type for information to help you prepare
for system installation and configuration. This document is available at
http://www.ibm.com/systems/bladecenter/.
© Copyright IBM Corp. 2007
responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for
the installation.
request IBM to install it, at no additional charge, under the type of warranty
service that is designated for your workstation.
technicians.
This printed document contains general information about the workstation,
including how to install supported options and how to configure the workstation.
This document is in Portable Document Format (PDF) on the IBM Documentation
CD. It contains translated caution and danger statements. Each caution and
danger statement that appears in the documentation has a number that you can
use to locate the corresponding statement in your language in the Safety
Information document.
This document is in PDF on the IBM Documentation CD. It contains information
about the terms of the warranty and about service and assistance.
®
®
BladeCenter
HC10 Type 7996 blade
1
Advertisement
Table of Contents
