Removing And Replacing The Scsi Daughter Card - IBM IntelliStation M Pro 6225 Hardware Maintenance Manual And Troubleshooting Manual

Removing and replacing the SCSI daughter card

Before you begin:
v Read the "Installation guidelines" on page 29.
v Read Appendix B, "Safety information," on page 115.
v Review the information in "System reliability guidelines" on page 29.
To remove the SCSI daughter card, complete the following steps:
1. Turn off the computer, if it is on.
2. Disconnect the power cord from the power source and from the computer; then,
3. Lay the computer on its left side.
4. Remove the side cover (see "Removing the side cover" on page 32).
5. Remove any long adapters that might impede access to the SCSI daughter
6. Disconnect the SCSI cable from the card.
disconnect all external cables.
card.
SCSI daughter card
SCSI cable connector
Chapter 4. Customer replacement units
37