v The server uses a rotational interrupt technique to configure PCI adapters.
Because of this technique, you can install a variety of PCI adapters that currently
do not support sharing of PCI interrupts.
v PCI slot 1 is on PCI bus A, PCI slots 2 and 3 are on PCI bus B, and PCI slots 4
and 5 are on PCI bus C. The system scans PCI slot 1, the system board
Ethernet, PCI slots 2-5, the system board SCSI, channel A, and the system
board SCSI channel B, if you have not changed the boot precedence from the
default.
You can use the Configuration/Setup Utility program to change the boot
precedence for the server. Select Start Options from the Configuration/Setup
Utility program.
Note: The Remote Supervisor Adapter must be installed in PCI slot 1.
Adapter installation
Adapter
Expansion-slot cover
45
Installing options