Installing options
This chapter provides instructions to help you add options to the server. Some
option-removal instructions are provided, in case you need to remove one option to
install another.
Major components of the xSeries 342 server
The orange color on components and labels in the server identifies hot-swap or
hot-plug components. This means that you can install or remove the components
while the system is running, provided that your system is configured to support this
function. For complete information about installing or removing a hot-swap or
hot-plug component, see the information provided in the detailed procedures in this
document under "Hot-swap drive installation" on page 49.
The blue color on components and labels indicates touch points where a
component can be gripped, a latch moved, and so on.
Note: The illustrations in this document might differ slightly from your hardware.
Hot-swap fan
Air baffle
Memory module
Fan sink
Microprocessor
Terminator card
System board
© Copyright IBM Corp. 2000, 2001
Filler panel for device bay
Filler panel for
drive bay
Hot-swap hard
disk drive
Hot-swap
power supply
Filler panel for
power supply bay
33