IBM 8669 - Eserver xSeries 342 Hardware Maintenance Manual page 100

Error Code/Symptom
166-400-000 System Management: Failed
System management hardware on system
board failed) (ISMP Self Test Result failed
tests: x where x = Flash, RAM, or ROM.)
180-XXX-000 (Diagnostics LED failure)
180-XXX-001 (Failed Front LED panel test)
180-XXX-002 (Failed Diagnostics LED
Panel test)
180-361-003 (Failed Fan LED test)
180-XXX-003 (Failed System Board LED
test)
180-XXX-005 (Failed SCSI Backplane LED
test)
201-XXX-0NN (Failed Memory test, see
"Memory Settings" on page 25)
201-XXX-999 (Multiple DIMM failure, see
error text)
202-XXX-001 (Failed System Cache test)
202-XXX-002 (Failed System Cache test)
206-XXX-000 (Failed Diskette Drive test)
215-XXX-000 (Failed IDE CD-ROM test)
217-198-XXX (Could not establish drive
parameters)
217-XXX-000 (Failed BIOS Fixed Disk test)
Note: If RAID is configured, the fixed disk
number refers to the RAID logical array
217-XXX-001 (Failed BIOS Fixed Disk test)
Note: If RAID is configured, the fixed disk
number refers to the RAID logical array
217-XXX-002 (Failed BIOS Fixed Disk test)
Note: If RAID is configured, the fixed disk
number refers to the RAID logical array
90
Hardware Maintenance Manual: xSeries 342 Type 8669
FRU/Action
1. Re-flash or Update firmware for ISMP
2. System board
1. Run Diagnostic LED test for the failing LED.
1. Operator Information Panel
2. Power Switch Assembly
3. System Board
1. System Board
1. Fan(s)
2. System Board
1. System Board
1. SCSI Backplane
2. SCSI Backplane Cable
3. System Board
1. DIMM Location slots 1-4 where NN = DIMM location.
Note: NN=1=DIMM 1 =2=DIMM 2 =3=DIMM 3 =4=DIMM 4
2. System Board
1. See error text for failing DIMMs
2. System Board
1. VRM 1
2. Microprocessor 1
1. VRM 2
2. Microprocessor 2
1. Cable
2. Diskette Drive
3. System Board
1. CD-ROM Drive Cables
2. CD-ROM Drive
3. System Board
1. Check cable and termination
2. SCSI Backplane
3. Fixed Disk
1. Fixed Disk 1
1. Fixed Disk 2
1. Fixed Disk 3