Hardware Requirements; Processor; Memory; Figure 11. Dimm Configuration Diagram - Intel SR1690WB - Server System - 0 MB RAM Service Manual

Hardware Requirements

To avoid integration difficulties and possible board damage, your system must meet the
requirements outlined below. For a list of qualified components, see the links under
"Server System

Processor

The Intel
series and Intel
less and with a max data transfer rate of 6.4 GT/s. For a complete list of supported
processors, see the links under

Memory

The Intel
®
Intel Server System SR1690WB supports two DIMMs per channel. The silkscreen on
the board for the DIMMs displays DIMM_A1, DIMM_A2, DIMM_B1, DIMM_B2,
DIMM_D1, DIMM_D2, DIMM_E1, DIMM_E2. See Figure 11. The minimal memory
population possible is DIMM_A1.
DIMM D2
DIMM D1
DIMM E1
DIMM F1
Channel F
Channel E
Channel D
For two slots per channel configurations, the server board requires DDR3 DIMMs within
a channel to be populated starting with the DIMM farthest from the processor. See the
following figure (Figure 12).
For a complete list of supported memory DIMMs, see the links under
References".
®
Intel Server System SR1690WB Service Guide
References".
®
Server System SR1690WB supports one or two Intel
® ®
Xeon Processor 5600 series with 95W Thermal Design Power (TDP) or
"Server System
®
Server System SR1690WB supports a DDR3-based memory subsystem. The

Figure 11. DIMM Configuration Diagram

®
Xeon
References".
DIMM A2
DIMM A1
DIMM B1
DIMM C1
Channel C
Channel B
Channel A
AF003226
®
Processor 5500
"Server System
21